Four key tips help choose fiber laser marking machine equipment

No matter what product we buy, we all hope to buy the best so that we can get value for money. This is especially true for users who want to buy it, because fiber laser marking machines are expensive, so how to choose a good fiber laser marking machine?   I believe this is a question that many users are concerned about .JXAUTOCNC Laser tells you how to judge the quality of a laser marking machine.

There are four key tips help you choose a good fiber laser marking machine :

First, is the quality of the laser good? 

Because the laser is the core part of the entire laser marking machine, its quality determines the quality of the laser marking machine.

Generally speaking, imported lasers are better, with good beam quality and high electro-optical conversion rate.China lasers are slightly inferior, but china lasers can also meet the needs of any industry. With the rapid development of the laser marking machine industry, fiber laser marking machine applications In terms of technology, china fiber laser marking machine technology is becoming more and more mature. Now the technical level is close to the international level, and the working hours are more than 80,000 hours. Everyone can buy with confidence.

Second, is the quality of the laser lens good?

Generally, the better the laser lens, the more laser light will be reflected and the smaller the laser loss will be, which will help increase the electro-optical conversion rate of the laser marking machine. There are two types of lenses: imported lenses and china lenses. china lenses are divided into two types: those produced with imported materials and those produced with china materials. The price gap is very large, and the use effect and service life are also very different.

Third, whether the galvanometer lens of the laser marking machine is good or bad.

the speed and accuracy of the laser marking machine are derived from the speed and accuracy of the galvanometer lens. The galvanometer lens will generate temperature during its working state. The longer the working time, the higher the temperature will be. If The galvanometer cannot withstand long-term operation, resulting in accuracy deviations and a decrease in speed. The galvanometer is currently the accessory with the highest failure rate for laser marking machines, so choosing a good galvanometer plays a key role in the stability of the equipment. effect.

Fourth, the marking software of the laser marking machine. 

The marking software is the brain of the entire device. It controls the laser and the galvanometer. The laser light output speed is fast or slow, the light output power is high or low, and the swing speed of the galvanometer lens is controlled by the software. The angle and the direction of the light are all controlled by software, so software plays a role in the equipment. Good accessories must use good software to take advantage of the accessories.
JXAUTOCNC Fiber laser marking machine mainboard all use the original controller board,its stable and fast.

Fifth, is the computer of the laser marking machine good?

The working environment in the workshop is very different from that in the office. The industrial computer used for laser marking machines is very different from the home computer and the computer used in the office. The stability requirements of its motherboard performance are particularly high and must be met. 24-hour continuous mission is considered a passing grade. Therefore, when choosing a computer, it is best to choose an industrial computer. Controlling the stability of the PC is very critical during the use of the equipment. Otherwise, after using it for a period of time, it will eventually be unable to keep up with the actual requirements of laser marking.
JXAUTOCNC fiber laser marking machine computer configuration is use the following configuration :
1.I77700
16G running memory Kintek memory
512 solid state drive brand Samsung
Independent radiator AVC
Windows10 64-bit English system
The dimensions of the 4U cabinet are as shown in the figure
19-inch Cloud Vision Monitor
Jaws Keyboard and Mouse

Also before choose a good fiber laser marking machine ,you need to learn about the fiber laser marking machine configurations:
Major parameters of the fiber laser marking machine are as shown in table below.